Administrative Measures for the Production Licenses for Feed Additives and Compound Feed (Revised in 2003)
Administrative Measures for the Production Licenses for Feed Additives and Compound Feed (Revised in 2003)
Administrative Measures for the Production Licenses for Feed Additives and Compound Feed (Revised in 2003)
Order of the Ministry of Agriculture No.26
April 4,2003
(Promulgated by the Ministry of Agriculture on December 14, 1999, and amended pursuant to the Decision of the Ministry of Agriculture on Amending the Administrative Measures for the Production Licenses for Feed Additives and Compound Feed as promulgated on April 7, 2003)
Chapter I General Provisions
Article 1 These Measures are formulated pursuant to Article 10 of the Regulation on the Administration of Feed and Feed Additives.
Article 2 The term "feed additives" as mentioned in these Measures include nutritive feed additives and common feed additives.
The term "compound feed" as mentioned in these Measures refers to the well-distributed prefix feeds confected by two or more feed additives with the carrier or thinner pursuant to a certain proportion, but the proportion of additives in the confected feed may not exceed 10%.
Article 3 The categories of feed additives that are produced, managed or used shall be those as listed in the Catalogue of Feed Addictives Allowed for Use as promulgated by the Ministry of Agriculture.
Chapter II Basic Conditions for Enterprises
Article 4 Personnel Requirements
1. The main principal of an enterprise shall have certain professional knowledge, production experiences and organization ability;
2. The person in charge of technologies shall have an educational background of junior college or higher or a middle-level technical title or higher, be familiar with the animal nutrition, technologies for producing products and production techniques, and have engaged in the corresponding professional work for more than two years;
3. The person in charge of quality management and the principal of the quality inspection department shall have an educational background of junior college or higher and have engaged in the corresponding professional work for more than three years; and
(4)An employee engaged in the special type of work shall possess a corresponding professional certificate.
Article 5 Requirements of Production Places
1. The layout of factories shall be reasonable, and the production areas, offices, warehouses and living areas shall be separated from each other;
2. The layout of workshops shall be consistent with the requirements of production process flows, and the working procedures are coherent and rational;
3. There shall be proper operational rooms and areas for properly placing equipment and materials so as to prevent the materials from mixing up or from cross contamination;
4.
......