Implementing Regulations of the Standardization Law of the People's Republic of China (from government website)
Implementing Regulations of the Standardization Law of the People's Republic of China (from government website)
[Lexis China Comments]
According to the Decision of the State Council on Amending and Abolishing Certain Administrative Regulations (Order of the State Council of the People's Republic of China No. 777), this document has been amended.
Implementing Regulations of the Standardization Law of the People's Republic of China (from government website)
Order of State Council[1990]No.53
April 6, 1990
Chapter I General Provisions
Article 1 These Regulations are formulated in accordance with the provisions of the Standardization Law of the People's Republic of China (hereinafter referred to as the standardization Law).
Article 2 Standards should be formulated for the following technical requirements that need to be unified:
1. varieties, specifications, quality and grades of industrial products or requirements pertinent to safety and hygiene ;
2. methods for design, production, experimentation, examination, packing, storage, transportation and utilization of industrial products or requirements pertinent to safety and hygiene in the course of production, storage and transportation;
3. various technical requirements and methods for examination concerning environmental protection;
4. technical requirements and methods for surveying, designing, construction and examination and acceptance in building projects;
5. technical terms, symbols, codes, drafting methods and requirements for conversion and coordination concerning industrial production, project construction and environmental protection;
6. varieties, specifications, quality, grades, examination, packing, storage, transportation and requirements for production technology and management expertise concerning agricultural products (including seeds, seedlings, breeding stock and breeding poultry and those in forestry, animal husbandry and fishery; the same below );
7. technical requirements concerning information, energy, resources, and transport.
Article 3 The State develops standardization undertakings in a planned way. Standardization work should be included in the plans for national economic and social development at the various levels.
Article 4 The State encourages the adoption of international standards and advanced standards abroad and takes an active part in the formulation of international standards.
Chapter II Administration of Standardization Work
Article 5 The task for those who are in charge of standardization work is: formulating standards, organizing the implementation of standards and exercising supervision over the implementation of standards.
Article 6 The competent department in charge of standardization under the State Council exercises unified leadership over the standardization work throughout the country, and it performs the following duties:
1. organizing the implementation of the State's laws, regulations, policies and measures concerning standardization ;
2. organizing the formulation of programmes and plans concerning standardization work in the whole country ;
3. organizing the formulation of national standards;
4. providing guidance to the relevant competent departments under the State Council and administrative departments for standardization work in the people's governments in the provinces, autonomous regions and the municipalities directly under the Central Government in their standardization work, and coordinating work in this field and dealing with problems arising therein;
5. organizing the implementation of standards;
6. conducting supervision over and inspection on the implementation of standards;
7. exercising unified leadership over attestation of product quality in the whole country ;
8. taking overall responsibility for professional contacts with the relevant international standardization organizations.
Article 7 The relevant competent departments under the State Council are responsible for the standardization work in their own departments or trades. They shall perform the following duties:
1. implementing the State's laws, regulations, policies and measures concerning standardization work and formulating specific procedures for their implementation in their departments and trades;
2. formulating programmes and plans concerning standardization work in their departments and trades ;
3. undertaking tasks assigned by the State of drafting state standards and organizing the formulation of the standards in their respective trades;
4. providing guidance to the relevant competent authorities in the provinces, autonomous regions and municipalities directly under the Central Government in their standardization work;
5. organizing the implementation of the standards in their departments and trades;
6. conducting supervision over and inspection on the implementation of standards;
7. taking charge of attestation of product quality in their own trades on the authorization from the competent department in charge of standardization under the State Council.
Article 8 The administrative departments for standardization in the people's governments in the provinces, autonomous regions and municipalities directly under the Central Government exercise unified leadership over standardization work in their respective administrative regions, and shall perform the following duties:
1.
......
According to the Decision of the State Council on Amending and Abolishing Certain Administrative Regulations (Order of the State Council of the People's Republic of China No. 777), this document has been amended.
Implementing Regulations of the Standardization Law of the People's Republic of China (from government website)
Order of State Council[1990]No.53
April 6, 1990
Chapter I General Provisions
Article 1 These Regulations are formulated in accordance with the provisions of the Standardization Law of the People's Republic of China (hereinafter referred to as the standardization Law).
Article 2 Standards should be formulated for the following technical requirements that need to be unified:
1. varieties, specifications, quality and grades of industrial products or requirements pertinent to safety and hygiene ;
2. methods for design, production, experimentation, examination, packing, storage, transportation and utilization of industrial products or requirements pertinent to safety and hygiene in the course of production, storage and transportation;
3. various technical requirements and methods for examination concerning environmental protection;
4. technical requirements and methods for surveying, designing, construction and examination and acceptance in building projects;
5. technical terms, symbols, codes, drafting methods and requirements for conversion and coordination concerning industrial production, project construction and environmental protection;
6. varieties, specifications, quality, grades, examination, packing, storage, transportation and requirements for production technology and management expertise concerning agricultural products (including seeds, seedlings, breeding stock and breeding poultry and those in forestry, animal husbandry and fishery; the same below );
7. technical requirements concerning information, energy, resources, and transport.
Article 3 The State develops standardization undertakings in a planned way. Standardization work should be included in the plans for national economic and social development at the various levels.
Article 4 The State encourages the adoption of international standards and advanced standards abroad and takes an active part in the formulation of international standards.
Chapter II Administration of Standardization Work
Article 5 The task for those who are in charge of standardization work is: formulating standards, organizing the implementation of standards and exercising supervision over the implementation of standards.
Article 6 The competent department in charge of standardization under the State Council exercises unified leadership over the standardization work throughout the country, and it performs the following duties:
1. organizing the implementation of the State's laws, regulations, policies and measures concerning standardization ;
2. organizing the formulation of programmes and plans concerning standardization work in the whole country ;
3. organizing the formulation of national standards;
4. providing guidance to the relevant competent departments under the State Council and administrative departments for standardization work in the people's governments in the provinces, autonomous regions and the municipalities directly under the Central Government in their standardization work, and coordinating work in this field and dealing with problems arising therein;
5. organizing the implementation of standards;
6. conducting supervision over and inspection on the implementation of standards;
7. exercising unified leadership over attestation of product quality in the whole country ;
8. taking overall responsibility for professional contacts with the relevant international standardization organizations.
Article 7 The relevant competent departments under the State Council are responsible for the standardization work in their own departments or trades. They shall perform the following duties:
1. implementing the State's laws, regulations, policies and measures concerning standardization work and formulating specific procedures for their implementation in their departments and trades;
2. formulating programmes and plans concerning standardization work in their departments and trades ;
3. undertaking tasks assigned by the State of drafting state standards and organizing the formulation of the standards in their respective trades;
4. providing guidance to the relevant competent authorities in the provinces, autonomous regions and municipalities directly under the Central Government in their standardization work;
5. organizing the implementation of the standards in their departments and trades;
6. conducting supervision over and inspection on the implementation of standards;
7. taking charge of attestation of product quality in their own trades on the authorization from the competent department in charge of standardization under the State Council.
Article 8 The administrative departments for standardization in the people's governments in the provinces, autonomous regions and municipalities directly under the Central Government exercise unified leadership over standardization work in their respective administrative regions, and shall perform the following duties:
1.
......